Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Assembly and Maintenance
6
Beiträge
3
Benutzer
0
Likes
4,880
Ansichten
Themenstarter
Took a photo after about 2 hours of total machine cutting time. I use NLGI class 2 lithium grease. Does this look normal or should I think about switching to another type/grade of grease?
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 28/03/2015 3:40 pm
Looks okay. We didn't grease out S420 V1 demo model at all and only used spray grease very infrequently and she it still going strong with no problems.
Just keep an eye and re apply when needed.
Veröffentlicht : 28/03/2015 8:26 pm
Themenstarter
Thank you for answering Rory. I was a little worried about the pattern seen on the roller.
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 29/03/2015 7:58 pm
As long as the roller moves okay as the machine moves and there is grease at the interface its okay. Careful putting too much grease into the ballscrew spindles. Personally spray lubricant (light oil type) is best as it has the added benefit of cleaning when applied with spray head. The grease can attract more crud than do good.
Veröffentlicht : 29/03/2015 11:16 pm
Themenstarter
Remembered that there already is a topic for discussing lubricants so jumped back to this thread. 🙂
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 01/04/2015 12:07 am
I read some of the posts on lubricants and have elected to use the relatively new WD40 Specialist range of lubricants including the spray on lithium grease. The do a very light PTFE lubricant too. Both seem good so far.
http://wd40specialist.com/products/protective_white_lithium_grease
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
Veröffentlicht : 03/10/2016 3:15 pm
