Notifications
Clear all
Topic starter
I have a Switch Unit SE 2300 that I thought would steer a vacuum cleaner.
The milling motor I have is an AMB 1050 FME-P DI with external speed control and is connected to the back of my SC2/420.
I understand that Switch Unit SE 2300 should be connected to an electrical outlet, and that the vacuum cleaner should be connected to Switch Unit SE 2300.
But what do I connect to the sub-D socket in Switch Unit SE 2300?
/Mika+
Stepcraft M.1000 + HIWIN Ball Screw + Semi-Closed Loop System + MM-1000 DI + Automatic Tool Changer + 2 Rows Tool Magazine Pneumatic Lifting + Engraving Laser DL445 + 4th Axis + Aluminum T-slot table + 3D Touch Probe + UCR201 + UCCNC + VCarve Pro + Cut3D + CorelDraw 2018 + Autodesk Inventor
Posted : 27/08/2020 7:01 pm
Topic starter
Sometimes it is simply just using what God gave us between the ears...
After installing the 2nd Layer Module, everything worked like a charm just like it should do.
/Mika+
Stepcraft M.1000 + HIWIN Ball Screw + Semi-Closed Loop System + MM-1000 DI + Automatic Tool Changer + 2 Rows Tool Magazine Pneumatic Lifting + Engraving Laser DL445 + 4th Axis + Aluminum T-slot table + 3D Touch Probe + UCR201 + UCCNC + VCarve Pro + Cut3D + CorelDraw 2018 + Autodesk Inventor
Posted : 27/08/2020 7:49 pm
