Notifications
Clear all
Topic starter
Hi everyone. I am trying to mill some parts from 20mm plywood. For this I need end mills with a cut of at least 20mm. The end mills sold on the Stepcraft website all have a cut length of about 8mm. Any ideas?
Posted : 19/07/2020 9:57 pm
>20mm depth starts at 3mm diameter because there is a relation between length and force. As you don't need to cut in one pass, the one with NL=25mm and SL=12mm should do just fine. If your spindle allows, bigger diameters would allow faster milling.
https://www.sorotec.de/shop/Cutting-Tools/sorotec-tools/2-flute-mills/END-Mill-WOOD/
SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
Posted : 20/07/2020 5:22 pm
