Neat vacuum for Stepcraft?
Hi all,
Just came across this neat cleaner, sounds useful for chip removal. No need for a separate vortex tube and waste bin.
( https://www.machinemart.co.uk/p/shop-vac-4041124-20l-ash-vacuum-230v/)
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
https://www.machinemart.co.uk/p/clarke-cvacash500-ash-can/ This one is £10 cheaper both have HEPA filter system
Hi,
I ordered one of the stainless steel models last week and it was delivered today. Looks to be of good quality and produces a good airflow when connected to the Stepcraft adapter.
The stainless steel bin is really sturdy, so no deflection under vacuum and the motor/filter assembly can be removed easily for servicing or filter cleaning/change by depressing a couple of latches. The original hose can be disconnected from the supplied standard end fitting by removing a couple of screws, and a purpose made adapter links this end fitting directly to the Stepcraft hose.
I made my adapter from Al tube, but a wooden one would present no problem on the router.
Very pleased so far - suction at the spindle collet is way better than my redoubtable "Henry" could muster.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Off to get one of these tomorrow. Looks even better value and good reviews.
http://www.screwfix.com/p/titan-ttb350vac-1300w-16ltr-wet-dry-vacuum-cleaner-240v/36516
I use a vonHaus ash vacuum which is very similar:
http://www.vonhaus.com/cleaning/
15 litre, 800 Watt, HEPA filter.
I bought mine from Domu UK via Amazon for £29.99. It's orange top even matches your Steppi.
https://www.domu.co.uk/vonhaus-ash-vacuum-cleaner
Noisy but effective!
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
- 44 Foren
- 7,395 Themen
- 63.3 K Beiträge
- 21 Online
- 26.5 K Mitglieder