Benachrichtigungen
Alles löschen
Accessories
4
Beiträge
3
Benutzer
0
Reactions
4,813
Ansichten
Themenstarter
I dont know if the folks at Stepcraft read this stuff or not. But when i got my 600 i went with the Dewalt for a spindle. And they told me they were working on a dust collector adapter. I was wondering where they/you are with that. I would LOVE one. Anyway. any feed back would be great. Thanks.
Veröffentlicht : 18/05/2016 4:49 am
Good morning!
Do You still know, who has told You so?
Produktevangelist 🙂
Es grüßt mit der Ihm gegebenen Freundlichkeit...
...der Thomas
Veröffentlicht : 18/05/2016 9:41 am
If you can't buy why don't you make your own, you've a Stepcraft...
I have a China spindle with more or less the same diameter and previously I used the original Dewalt spindle adapter from Stepcraft. Then I made my own and added a removable dust collector. Meanwhile I have a second dust collector board (the white plastic part) without the brush.
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Veröffentlicht : 18/05/2016 10:55 am
Themenstarter
Well I ordered mine sometime in Feb. So, I was told then. That they were working on one. It should be a few months. So, i was hoping.
As far as making one. I am not that far yet. I am very very new and am still learning. Either way i would love to have something. I am getting tired of chasing the cutter with the vacuum.
Thanks again.
Veröffentlicht : 19/05/2016 3:30 am
