Notifications
Clear all
Topic starter
Hello guys,
A colleague of mine has just purchased and assembled one of your Stepcraft2 840 systems, along with a 6mm, and 3mm end mill, , and 3mm ball, and 1mm ball mill
We are wanting to use the pieces for cutting into hardwood and softwood, but there is no information provided with the pieces, or on the website, as to suggested feed rates, rpm, etc, only suggested material.
Can anyone help me out with some settings to use the above with say a hardwood and softwood? - thinking Cut depth per pass, feed rate and RPM mainly - but any other settings would be usefull.
Posted : 24/09/2015 8:30 pm
Hello finch - welcome to the forum!
Here is a link to a German collection of Stepcraft settings for wood - maybe you like to use Google translator to get a first impression for the parameters ...
It's not only about tools it's also about skills! 😉
Posted : 24/09/2015 9:40 pm
Topic starter
Awesome ! Dankeshun !
Hello finch - welcome to the forum!
Here is a link to a German collection of Stepcraft settings for wood - maybe you like to use Google translator to get a first impression for the parameters ...
Posted : 25/09/2015 8:24 am
