file Frage Speed Setting for 3D printing on slicer

Mehr
28 Nov 2016 19:18 #39902 von bernardp
Speed Setting for 3D printing on slicer wurde erstellt von bernardp
Hello everyone,
I finished my first 3D printing with stepcraft 2-300 and I m surprised about speed printing, it's a bit slow compared a standard printer.
My setting:
printing (all task: perimeters, infill, gap and bridge etc...): 15 mm/s or 900mm/min
travel, non working movement: 20 mm/s or 1200mm/min
acceleration: auto

Is it normal?
And you, what's your speed setting?

My software: Repetier - Slic3r

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
27 Apr 2021 23:56 - 27 Apr 2021 23:57 #61037 von Morglum007
Morglum007 antwortete auf Speed Setting for 3D printing on slicer
Hi there Bernard,

A little bit late, but it is normal. CNC milling machines are slower than 3D printers only machines. Milling machines need strength and accuracy in the movements, while the 3D printers only require accuracy. Hence, the torques required by milling machines are way larger than the ones for 3D printers. Thus, you cannot ask to have the same speed to a milling machine than a 3D printer only.
TIP: My setup with upgraded Y axis motors (no belt) is 20 mm/s.


Morg
Letzte Änderung: 27 Apr 2021 23:57 von Morglum007. Grund: Typos

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.