Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
3
Beiträge
2
Benutzer
0
Likes
5,081
Ansichten
Themenstarter
Hi,
anyone tried FreeMILL with SC?
http://mecsoft.com/freemill/
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 13/06/2014 2:25 pm
Hi Markku,
the program creates G code so it should work with SC, provided you have anything better than the USB Starter software.
From what I read on the web FreeMill has a limitation regarding the Z axis. You cannot control the additional depth per turn. So if you want to cut 10 mm in total it will do so all at once! This probably means you are restricted to thin plywood.
Wilhelm
Veröffentlicht : 13/06/2014 4:32 pm
Themenstarter
Ok, then that is not usable...Thanks
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 19/06/2014 12:00 pm
