Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Show us your Stepcraft Creations
6
Beiträge
3
Benutzer
0
Likes
4,130
Ansichten
Themenstarter
Stepcraft 420
Proxxon IBS/E spindle
2 mm two fluted slot drill
12000 rpm
300 mm/min feed
100 mm/min plunge
Cut depth 0.7 mm
Material type = Poplar plywood 3 mm thick
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 20/09/2014 6:30 pm
Nice! Thanks for sharing with us! 🙂
It's not only about tools it's also about skills! 😉
Veröffentlicht : 20/09/2014 10:49 pm
Themenstarter
Cheers Worldhusky,
Like to share
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 20/09/2014 11:11 pm
Super! Looks great. Nice use of staggered clamping too !!
Veröffentlicht : 21/09/2014 3:22 am
Themenstarter
On the previous shapes I had milled the small holes which are 3 mm with a 3 mm cutter in one go then changed over to a 2 mm cutter to mill the inner shape followed by the outer circles row by row.
But on this occasion I stuck with the 2 mm cutter and milled the smaller 3 mm holes in one go
followed by the inner shapes then outer circles row by row.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 21/09/2014 4:25 am
Anything to avoid tool changes! We don't like tool changes!!
Veröffentlicht : 23/09/2014 12:47 am
