Dear user, the forum software has been updated. For the first login please reset your password.
First tests with some basic plotting
This was our first tests of the STEPCRAFT system before the accessories arrived. We used some tape and a pen to get going with some early plotting!
https://www.youtube.com/watch?v=LRDERxAk490
![Frenske Frenske](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Papje_27769.jpg)
Hello Rory,
I have the cnc pencil from Stepcraft but the settings in winpc are not clear to me. I suppose you must set the cutting depth but how much?
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
![Andreas Andreas](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/MagIO2_26123.jpg)
Just enough to have a little pressure on the ball pen refill. I'd guess something like 1-2mm should be fine.
SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
![Frenske Frenske](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Papje_27769.jpg)
I thought that by myself also. The pen has a spring so no worries. Thanks MagIO2, in German and English haha!
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
Spring helps you out if the paper is not mounted flat. Post some pics of your results.
![Frenske Frenske](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Papje_27769.jpg)
Well, the Stepcraft pencil is included with a spring.
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
- 44 Foren
- 7,577 Themen
- 63.5 K Beiträge
- 6 Online
- 26.5 K Mitglieder