Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Introduce Youself
4
Beiträge
2
Benutzer
0
Likes
4,000
Ansichten
Themenstarter
Hello STEPCRAFT forum users.
My name is Doug, I am from Scotland, United Kingdom. I am an Operations Engineer at a nuclear power station but my university education was in Chemistry. I have just bought a STEPCRAFT 2/840 machine with fourth axis rotary table and HF500 spindle.
My software suite is:
- TurboCAD V19.2 Pro Platinum
- MeshCAM
- GWizard feeds & speeds calculator
- UCNC machine control software
I plan to use the machine to make electric solid and hollow body guitars (luthiery) starting with a Brian May Red Special replica for myself (see render below from my own CAD design). I have no previous experience in CAM or machine operation.
I am active on the following forums relating specifically to Brian May guitars, amplifiers and equipment:
http://www.redspecialforum.com/portal.php
http://rsbuildersassociation.freeforums.org/portal.php
I plan to take my time setting up the machine, tuning and testing it before making the final cuts but when I am ready, I will post up build comments, build information, videos, etc.
Regards.
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
Veröffentlicht : 03/10/2016 3:02 pm
Welcome Doug,
don't forget to post pictures from your guitar :cheer: :woohoo:
OK, needs some time until ... but we are waiting 🙂
ahhh...there's the first idea ina picture, so show us the real thing 🙂
Cheers
Hartmut
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Veröffentlicht : 03/10/2016 3:08 pm
Themenstarter
Many thanks for the welcome Hartmut.
The other reason I have to take my time is that I work shifts and have two children so I don't get very much spare time to make or play guitars 🙁
I need to work overtime to pay for the machine and tools which reduces the available time even more!
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
Veröffentlicht : 03/10/2016 3:11 pm
HI Doug,
take your time. Better slowly and exact then fast and finally you have to re-assemble parts, find and remove problems.
I assembled my machine in 3 evenings ...I couldn't stop and wait... 😉
Good luck!
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Veröffentlicht : 03/10/2016 4:28 pm
