file Question Ball Screw replacement for wearing thread nuts

More
23 Dec 2018 21:16 #55489 by mikath
I have installed SKF Ball Screws in my Stepcraft 2-420, and I am not sure what lubricant I should use? :dry:

This image is hidden for guests.
Please log in or register to see it.



This image is hidden for guests.
Please log in or register to see it.



My best regards
/Mika+

Stepcraft 2-420 + Performance Kit + Ball Screws + Vacuum Table + HF500 ATC + AMB 1050 FME-1 DI ATC + DL445
4th Axis + Circular Table + 3D Touch Probe + Drag Knife + Mini CNC Pen + Switch Unit SE 2300
UC100 + UCR200 + UCR201 + UCCNC + VCarve Pro + Cut3D + CorelDraw 2018 + Autodesk Inventor

Please Log in or Create an account to join the conversation.

More
24 Dec 2018 15:25 - 24 Dec 2018 15:29 #55495 by julius
Anleitungen sagen Öl auf die spindeln, aber ich bin sehr sher skeptisch.
Du solls ein öl mit sehr sehr stärke Klebeeigenschaften finden.

Ich benuzte OKS 402 Lithium-Fett:

Schmierung von Gleit-, Wälz- und Gelenklagern, Keilwellen,
Steckachsen, Gewindespindeln und Gleitflächen aller Art
bei normalen Belastungen und allen für die Fettschmierung
üblichen Gleitgeschwindigkeiten


https://www.stepcraft-systems.com/en/forum/betrieb/5758-reinigung#55463

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Last edit: 24 Dec 2018 15:29 by julius.

Please Log in or Create an account to join the conversation.

More
24 Dec 2018 21:46 #55496 by mikath
What do you think about PTFE Grease?
PTFE Grease.

I will order on of OKS 402 and try it.
Can I use OKS 402 to the rollers as well?

My best regards
/Mika+

Stepcraft 2-420 + Performance Kit + Ball Screws + Vacuum Table + HF500 ATC + AMB 1050 FME-1 DI ATC + DL445
4th Axis + Circular Table + 3D Touch Probe + Drag Knife + Mini CNC Pen + Switch Unit SE 2300
UC100 + UCR200 + UCR201 + UCCNC + VCarve Pro + Cut3D + CorelDraw 2018 + Autodesk Inventor

Please Log in or Create an account to join the conversation.

More
31 Dec 2018 13:20 - 31 Dec 2018 13:22 #55540 by julius

mikath wrote: What do you think about PTFE Grease?
PTFE Grease.

I love Teflon, but I never tried it on the Steppie. The main problem are the adhesive properties of the grease. The product shown at the link you posted says nothing about that. :(
Here below there is another PTFE-grease, they claims "excellent adhesion", it will be true? There is no datasheet to make a comparison... mmmmh...
https://www.motipdupli.com/en/INT/products/motip/professional/technical-sprays/ipg-1301/tm-1301.html


mikath wrote: I will order on of OKS 402 and try it.
Can I use OKS 402 to the rollers as well?

Absolutely.
Viscosity of the OKS 402 (110 mm2/s) is somehow in the middle between an oil and the Microlube GL 261, so you can use it for nuts/spindle and the rollers as well.

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Last edit: 31 Dec 2018 13:22 by julius.

Please Log in or Create an account to join the conversation.

More
31 Dec 2018 13:29 #55541 by mikath
Density 0,93 g/cm3 (DIN51757)
Viscosity NLGI 2
This is on the grease in my link.
Data sheet PTFE Grease.

My Best Regards
/Mika+

Stepcraft 2-420 + Performance Kit + Ball Screws + Vacuum Table + HF500 ATC + AMB 1050 FME-1 DI ATC + DL445
4th Axis + Circular Table + 3D Touch Probe + Drag Knife + Mini CNC Pen + Switch Unit SE 2300
UC100 + UCR200 + UCR201 + UCCNC + VCarve Pro + Cut3D + CorelDraw 2018 + Autodesk Inventor

Please Log in or Create an account to join the conversation.

More
21 Dec 2019 11:45 #57859 by kiq5555
I made same SKF ball screw (SH 10 x 3 R) holders.
Firstly I tried to thread the workpiece by hand, but the result was not acceptable.
The best result came with 4th axis and thread mill.

Now i can do these holders for others too:)

I think that POM-C plastic should work also, but I still used 6082 T6 Aluminium.

Uploaded some videos to WiseParker facebook site:
www.facebook.com/WiseParkerEE/videos/484377495768269/

Thanks to everyone who shared pictures and ideas.

This message has an attachment image.
Please log in or register to see it.

The following user(s) said Thank You: peterg1000

Please Log in or Create an account to join the conversation.

More
29 Mar 2020 08:00 #58632 by vikingpirate
Replied by vikingpirate on topic Ball Screw replacement for wearing thread nuts
Hi I had a question I also have a Stepcraft D840 version 2 and have quite a lot of backlash on my Y axis and tried the new anti backlash nuts from stepcraft but this one fit very badly and I sent them back. Now I read this message and am very curious if this works well. Do you have the correct dimensions of the Y lead screws and maybe a link where you bought the new bullet screws. I am very much looking for a better solution.

Please Log in or Create an account to join the conversation.

  • mathieu.hebbrecht
  • mathieu.hebbrecht's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
06 Apr 2020 13:35 #58736 by mathieu.hebbrecht
Replied by mathieu.hebbrecht on topic Ball Screw replacement for wearing thread nuts
Hi all,
I'm also interested in the modification. If quite some backlash on my Y and Z axis.
I don't have the gear to cut these alu holders myself. I can image that more users are interested. Maybe someone who's better equipped can help another SC user out?

Please Log in or Create an account to join the conversation.

More
11 Nov 2020 07:10 #59803 by Tulnukas
Replied by Tulnukas on topic Ball Screw replacement for wearing thread nuts
Hi!

I just got some original FGR 10x3 RH ballscrew nuts if someone is interested. I have 10 brand new FGR ballscrew nuts available. I will send from Estonia.

Best wishes!
Martin

Please Log in or Create an account to join the conversation.

More
25 Nov 2021 03:12 #61675 by laranja169
Replied by laranja169 on topic Ball Screw replacement for wearing thread nuts

Tulnukas wrote: Hi!

I just got some original FGR 10x3 RH ballscrew nuts if someone is interested. I have 10 brand new FGR ballscrew nuts available. I will send from Estonia.

Best wishes!
Martin


Hello, do you have 4x to sell to me please? Which price? Can we talk via WhatsApp 00351934139078 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2021 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.