Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
stepcraft 2/420
Assembly and Maintenance
2
Beiträge
2
Benutzer
0
Likes
4,920
Ansichten
Themenstarter
hello.
can anyone give mi the machine parameters for the stepcraft 420/2?
2. when i did the homing test,i found :
homing differences:
x=-304
y=320
z=-233 steps
is it normal?
Veröffentlicht : 08/06/2015 3:20 pm
Hello Perandin,
if you work with the software WinPC-NC, you will find the machine parameters for SC 2/420 here
The parameters from manufacturer is here Unfortunately, this are the parameters for the old Stepcraft. The Serie 2 has 3mm instead of 2mm spindle incline (Weg pro Umdrehung).
On this reason, I made a wrong configuration for LinucCNC, and all my pices were to great by factor 1.5.
Regards
Tom
SC 2/420 - Parallel, HF-500, LinuxCNC, Estlcam
Veröffentlicht : 08/06/2015 4:25 pm
Forum Information
- 44 Foren
- 7,333 Themen
- 63.2 K Beiträge
- 5 Online
- 26.3 K Mitglieder
Unser neuestes Mitglied: MVorgrimler
Letzter Beitrag: Y axis not stopping during homing
Forum Icons:
Das Forum enthält keine ungelesenen Beiträge
Das Forum enthält ungelesene Beiträge
Themen-Icons:
Unbeantwortet
Beantwortet
Aktiv
Heiß
Oben angepinnt
Nicht genehmigt
Gelöst
Privat
Geschlossen