Search
Instagram Youtube Linkedin Tiktok Facebook

CNC MILLING MACHINE FOR SINGLE AND SERIAL PRODUCTION

THE NEW STEPCRAFT Q-SERIES - Available from June 24

Increase your efficiency! Manufacture quickly and individually without having to outsource your orders externally. With the powerful CNC machine, you can process a variety of panel materials in single or serial production. The industrial milling machine is made from state-of-the-art components and is perfectly tailored to commercial requirements.

The CNC machine will be available as Q.408 from June 2024. Need advice? We are happy to assist you. You can reach us by email at [email protected] or by phone at +49 (0) 2373 / 179 11 60.

PREORDER NOW

MACHINE STAND

The structurally integrated machine base frame consists of 100 x 100 mm aluminum profiles in combination with 6 mm thick steel juction plates and provides a stable base for the CNC system. The base frame is supplied as standard.

ROBUST GUIDANCE

Linear ball rail guides with high load capacity and specific aluminum support profiles with torsion-resistant geometry ensure a stable machine chassis.

POWERFUL DRIVE

Optimally controlled NEMA 34 closed-loop stepper motors and smooth-running drive units enable effective operation.

MACHINE STAND

The structurally integrated machine base frame consists of 100 x 100 mm aluminum profiles in combination with 6 mm thick steel juction plates and provides a stable base for the CNC system. The base frame is supplied as standard.

HIGH PRECISION

With the actively readjusting closed loop system and the precisely manufactured ball bearing guides, workpieces of the highest quality are produced.

INTEGRATED CABLE ROUTING

The cables are routed using integrated drag chains. Quality cables with a suitability for up to 10 million bending cycles ensure reliability and durability.

TOOL MOUNT

The Z-axis is equipped with integrated mounting grooves for insert tools and accessories.

INTEGRATED SWITCH CABINET SHELF

The control electronics including motor driver and power supply units are encapsulated and integrated under the machine table. The switch cabinet shelf can be pulled out for maintenance and inspection work.

COMPLETE ENCAPSULATION

All linear guides and ball screws are protected against contamination with strip brushes or silicone seals.

EASY MAINTENANCE

Removable axis covers and easy access to the lubrication fittings of the ball runner blocks enable easy maintenance.

LED ILLUMINATION

The machine table is optimally illuminated with the LED lighting integrated in the X-axis.

Size

Speed

Precision

Load capacity

POWERFUL CNC MACHINING

The STEPCRAFT Q-Series meets your needs as a gantry milling machine or as a universal milling machine. This makes the CNC machine suitable for a wide range of industries: from woodworking in carpentry to metalworking and advertising technology.

The STEPCRAFT Q.408 can effortlessly process panel materials up to a length of 2.60 meters and a width of up to 1.30 meters. NEMA 34 Closed-Loop stepper motors ensure powerful and fast drive on all axes. The CNC gantry is accelerated using two electrically synchronized stepper motors (gantry system) to ensure maximum travel safety and speed.

CNC: PRECISION AND RELIABILITY

The Q-Series ensures optimal precision and reliability in the manufacturing and processing of high-quality workpieces. To achieve this, the machine frame has been uniformly reinforced, and steel components have been used in structurally high-stress areas. In addition, HIWIN® ball screws are used on all axes to achieve optimal efficiency. This results in a repeatability of +/- 0.012 mm and a backlash of < 0.03 mm.

SOLID FRAME

  • 10 crossbeams, 12 junction plates, and 6 integrated machine legs, along with the two massive Y-axis crossbeams, form a torsion-resistant machine base.
  • Creating an optimal support surface for the machine table, which, when fully bolted, contributes to additional reinforcement of the frame.

STRONG COMPONENTS

  • Custom aluminum support axles with optimized torsional and bending stiffness, as well as improved self-damping.
  • 20 mm wide high-precision ball rail guides on all axes.
  • Portal side panels made of 20 mm thick aluminum sheet.
  • Steel connectors at structurally heavily loaded points.

ROBUST DRIVE

  • NEMA 34 Closed-Loop stepper motors on all axes
  • HIWIN® ball screw drive with 20 mm diameter on all axes
  • Double implementation of stepper motor and ball screw drive on the Y-axis (Gantry System) for maximum agility, reliability, and precision.

Q-SERIES: CNC DATA OVERVIEW

The perfect industrial milling machine for your needs: We have summarized the most important technical data for you in a table. Would you like more information? We are happy to assist you further and provide you with a custom quote. You can reach us by email at [email protected] or by phone at +49 (0) 2373 / 179 11 60.
STEPCRAFT Q.408
Workspace X-Y
1.302 x 2.670 mm / 51.26 x 105.12 in
Clearance height
270 mm / 10,63 in
Repeatability
+/- 0,015 mm 0,00047 in
Programmable Resolution
0,003125 bis 0,00625 mm 0,00012 to 0,00025 in
Backlash
< 0,03 mm 0,0012 in
Max. Speed Diagonal Travel X-Y
600 mm/s 23,62 in/s
Spindle
20 x 20 mm 0,79 x 0,79 in ball screws, with floating ball nut on Y-axis
Linear Guide
High precision ball rail guide
Drive
NEMA 34 Closed-Loop stepper motors
Tool holder
T-slots with DIN 508 M8x15 T-slot nuts,
optional clamping holder ø 43 mm / 1,69 in (Euro neck, optionally smaller diameters)
Weight
473,0 kg / 1042,79 lbs
Input Voltage
100 - 240 V
Output Voltage
24 / 60 V
Power Consumption
750 W
Interface
USB / Parallel (LPT1) / Netzwerk RJ-45

MECHANICAL ENGINEERING FROM GERMANY

Hauptsitz Stepcraft in Menden

Quality from Germany

STEPCRAFT is a “made in Germany” company. Since 2012, we have been developing and distributing CNC machines and CNC accessories, strongly relying on collaboration with local suppliers. With over 25 employees, our subsidiary STEPCRAFT Inc., and numerous dealers in many different countries, we work every day to support and supply customers around the world.

© 2024 STEPCRAFT GmbH & Co. KG