Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
2
Beiträge
2
Benutzer
0
Likes
4,390
Ansichten
Themenstarter
Using Aspire 8.5 WinPC-NC post processor.
Everytime I have to reverse Z-axis in WinPC-NC.
But I guess it causes many different issues and constant headache.
Did anybody solve this problem?
And generaly speeking "whos this fault"? How do you think?
Rhinoceros -> Aspire 8.5. -> WinPC-NC (USB full)
Veröffentlicht : 07/03/2017 12:08 am
Hello Alexxfx,
There's nothing wrong in Aspire, your problem lays in WinPc-NC.
I suggest uyou check te folliwing settings in Winpc.
In tab Data format:
- check DIN/ISO;
- check at HPGL-Multicam - DIN/ISO the first checkbox;
and the most important at the DIN/ISO stting
- check invert Z-coordinates
Hint:
Save these settings as default in WinPC.
I use in Aspire the post processor "WinPC-NC Arcs mm (*.nc)" and that one works fine with the above settings.
Good luck
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 07/03/2017 10:37 am
