- Beiträge: 380
- Dank erhalten: 131
Frage
Forum Upgrade/Maintenance.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
03 Aug 2017 10:09 #49305
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Forum Upgrade/Maintenance. wurde erstellt von peterg1000
Am I correct in thinking the forum format that I am seeing is temporary during the maintenance period,? The old familiar format disappeared early this week - hope it not a problem with my computer, although everything else seems unchanged.
Peter
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
15 Aug 2017 18:01 - 15 Aug 2017 18:03 #49620
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Dieser Beitrag enthält Bilddateien.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
It seems there has been no change to the forum format that appeared a couple of weeks ago .
I've attached a screen shot of how the Forum appears on my screen now - is this correct or has the maintenance carried out made it incompatible with my systems (Win XP and Win 7 both appear the same.
If what I am seeing now is correct, then IMHO it is a retrograde step !!
I've attached a screen shot of how the Forum appears on my screen now - is this correct or has the maintenance carried out made it incompatible with my systems (Win XP and Win 7 both appear the same.
If what I am seeing now is correct, then IMHO it is a retrograde step !!
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.
Letzte Änderung: 15 Aug 2017 18:03 von peterg1000. Grund: duplicated attachments
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MrMaJo
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 520
- Dank erhalten: 180
15 Aug 2017 19:00 #49621
von MrMaJo
Gelernt auf Stepcraft 420
Jetzt mit der Sorotec AL-1107 unterwegs.
MrMaJo antwortete auf Forum Upgrade/Maintenance.
Yes, that is how it looks like now.
There is a discussion ongoing in the German part of the forum.
I think most of the people are not really happy about the new design.
There is a discussion ongoing in the German part of the forum.
I think most of the people are not really happy about the new design.
Gelernt auf Stepcraft 420
Jetzt mit der Sorotec AL-1107 unterwegs.
Folgende Benutzer bedankten sich: peterg1000
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 224
- Dank erhalten: 81
16 Aug 2017 09:57 #49628
von CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
CNCMiller antwortete auf Forum Upgrade/Maintenance.
Not happy about the new design, you couldn't be more right.
It is a horrible design.
Hope they change it back.
It is a horrible design.
Hope they change it back.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Folgende Benutzer bedankten sich: peterg1000
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
16 Aug 2017 10:07 #49629
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
So glad I am not the only one who thinks the new "design" is truly awful.
What on earth was the thinking behind this change??
At the risk of ruffling someones feathers, dare I say that it looks totally amateurish and unattractive.
Lets have the old one back a.s.a.p.
What on earth was the thinking behind this change??
At the risk of ruffling someones feathers, dare I say that it looks totally amateurish and unattractive.
Lets have the old one back a.s.a.p.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- ThomasDbg
-
- Offline
- Moderator
-
- SC2/600 mit HF Spindel 500W
16 Aug 2017 11:24 - 16 Aug 2017 11:24 #49632
von ThomasDbg
Produktevangelist
Es grüßt mit der Ihm gegebenen Freundlichkeit...
...der Thomas
ThomasDbg antwortete auf Forum Upgrade/Maintenance.
Hey Guys!
Thanks for your feedback! As I also said in the German section, I am not sure, if I can convince the Management to rechange the Forums layout, but I´ll do my best.
Thanks for your feedback! As I also said in the German section, I am not sure, if I can convince the Management to rechange the Forums layout, but I´ll do my best.
Produktevangelist
Es grüßt mit der Ihm gegebenen Freundlichkeit...
...der Thomas
Letzte Änderung: 16 Aug 2017 11:24 von ThomasDbg.
Folgende Benutzer bedankten sich: peterg1000
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
23 Aug 2017 18:34 #49817
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
I've found out the hard way that this awful new format has a really nasty trick laying in wait!!
Several times I have attempted to reply to posts and help where I can, only to find that when I press the "Submit" button, the forum comes back telling me that my session has timed out and promptly destroys what I have written. What a total waste of my time and energy, and frustrating for the original poster who is getting no answers to valid queries
I feel disinclined to bother any more until something is done to restore a more professional forum format ................... AS IT WAS BEFORE !!!!
Peter
Several times I have attempted to reply to posts and help where I can, only to find that when I press the "Submit" button, the forum comes back telling me that my session has timed out and promptly destroys what I have written. What a total waste of my time and energy, and frustrating for the original poster who is getting no answers to valid queries
I feel disinclined to bother any more until something is done to restore a more professional forum format ................... AS IT WAS BEFORE !!!!
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Folgende Benutzer bedankten sich: MagIO2, peti-digital, DocBrown
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
03 Sep 2017 10:57 - 03 Sep 2017 10:59 #50018
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
Hi all,
Sorry to be moaning again about the new (awful) forum format!!
It still throws out messages when submitted, saying that my session has timed out - please log in again (I'm already logged in damnit!!!) The way around this appears to be to save any message to Windows clipboard, close down and then restart the Forum session. Next go to the original place where the message was generated and transfer from clipboard to message box, then submit again.
For goodness sake , please fix this ridiculous limitation. The old forum worked properly - moral is "If it ain't broke, don't fix it" !!!!!!!
Peter
Sorry to be moaning again about the new (awful) forum format!!
It still throws out messages when submitted, saying that my session has timed out - please log in again (I'm already logged in damnit!!!) The way around this appears to be to save any message to Windows clipboard, close down and then restart the Forum session. Next go to the original place where the message was generated and transfer from clipboard to message box, then submit again.
For goodness sake , please fix this ridiculous limitation. The old forum worked properly - moral is "If it ain't broke, don't fix it" !!!!!!!
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Letzte Änderung: 03 Sep 2017 10:59 von peterg1000. Grund: typo correction
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MagIO2
-
- Offline
- Forum Nutzer
-
- Zu viele Ideen und zu wenig Zeit
Weniger
Mehr
- Beiträge: 2607
- Dank erhalten: 791
03 Sep 2017 23:01 #50023
von MagIO2
SC 420 mit DIY parallel +Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
MagIO2 antwortete auf Forum Upgrade/Maintenance.
My experience is a bit different. The error message does not say that the login-session timed out, it only says that you needed too long to respond - it's an write answer timeout. So, yes, I also copy the written text into the clipboard, but after the error message you can go back to the thread and immediately answer again.
Even better: directly write the text in an editor and when done click the reload & answer buttons and paste the text.
Even better: directly write the text in an editor and when done click the reload & answer buttons and paste the text.
SC 420 mit DIY parallel +
Gruß, Andreas
Folgende Benutzer bedankten sich: peterg1000
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
03 Sep 2017 23:17 #50024
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
Hi Andreas,
The solutions we have both discovered are essentially the same, but the most important point is - why have a timeout at all? Why introduce a timeout in the first place? I've never come across one in any other forum that I subscribe to.
How long are we allowed to cogitate on our replies - not long enough to answer some complicated issues in my experience!!
Regards.
Peter
The solutions we have both discovered are essentially the same, but the most important point is - why have a timeout at all? Why introduce a timeout in the first place? I've never come across one in any other forum that I subscribe to.
How long are we allowed to cogitate on our replies - not long enough to answer some complicated issues in my experience!!
Regards.
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- ThomasDbg
-
- Offline
- Moderator
-
- SC2/600 mit HF Spindel 500W
04 Sep 2017 12:58 #50030
von ThomasDbg
Produktevangelist
Es grüßt mit der Ihm gegebenen Freundlichkeit...
...der Thomas
ThomasDbg antwortete auf Forum Upgrade/Maintenance.
Good morning, you both!
We raised the timeout from 2400 to 4800 seconds, would you be so Kind to check, if it works now?
Thanks and regards,
Thomas
We raised the timeout from 2400 to 4800 seconds, would you be so Kind to check, if it works now?
Thanks and regards,
Thomas
Produktevangelist
Es grüßt mit der Ihm gegebenen Freundlichkeit...
...der Thomas
Folgende Benutzer bedankten sich: peterg1000
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
04 Sep 2017 13:50 #50031
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
hi Thomas,
Thanks for that information and for raising the timeout - that's a much more realistic time when answering a complicated query. At least I know how long I have to think.
regards,
Peter
Thanks for that information and for raising the timeout - that's a much more realistic time when answering a complicated query. At least I know how long I have to think.
regards,
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MagIO2
-
- Offline
- Forum Nutzer
-
- Zu viele Ideen und zu wenig Zeit
Weniger
Mehr
- Beiträge: 2607
- Dank erhalten: 791
04 Sep 2017 13:58 #50032
von MagIO2
SC 420 mit DIY parallel +Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
MagIO2 antwortete auf Forum Upgrade/Maintenance.
I'd expect that the timeout setting does not work at all. 2400sec = 40min. In the cases I remember we talk maximum about 10-20min. So the old settings should have been fine already.
(I think it's your turn to test your forum before you release it into the wild. I avoid to spend too much time with it since you downgraded)
(I think it's your turn to test your forum before you release it into the wild. I avoid to spend too much time with it since you downgraded)
SC 420 mit DIY parallel +
Gruß, Andreas
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
16 Sep 2017 17:24 #50196
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf Forum Upgrade/Maintenance.
Time for yet another moan about the awful new Forum format. I hate it!!
It is very noticeable that activity on the English forum has almost stopped since the downgrade too, so maybe I am not alone in disliking it!!
There is also different format on the downgraded German forum - more information fields - hmmm, wonder why?
Peter
It is very noticeable that activity on the English forum has almost stopped since the downgrade too, so maybe I am not alone in disliking it!!
There is also different format on the downgraded German forum - more information fields - hmmm, wonder why?
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.