Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.

Benachrichtigungen

Alles löschen

scale problem

Milling

Letzter Beitrag von YOEL Vor 6 Jahren

4 Beiträge

4 Benutzer

0 Likes

6,054 Ansichten

RSS

olivier leroy

(@leroyo)

Beiträge: 6

Active Member

Themenstarter

Hi all,

Hope someone can help me. I have a scale problem.
I draw a piece in rhino, make the CNC programm with Cut3D, and open it on Winpc-nc (sorry if I don't use correct therm, i'm still a newbie)... but piece that the machine mill is huge. Not at all the measures I draw in rhino.

Any help is welcome as I browse all the menu and I didn't see something like "scale factor", "scaling" or something else...

any idea ?

http://voodoof3k.blog4ever.com/

Veröffentlicht : 25/05/2015 8:30 pm

Volker Hess

(@buggyfahrer)

Beiträge: 214

Estimable Member

Scale you will find here:

Be also sure about the right units (Einheiten)

Gruß Volker

Veröffentlicht : 25/05/2015 9:38 pm

Andreas

(@magio2)

Beiträge: 2619

Famed Member

Could also be caused by wrong pitch setting. New SC has 3mm per revolution whereas the software setting might be for SC 1 which has 2mm per revolution. These settings are done in another tab after clicking a button.

SC 420 mit DIY parallel + ~~Proxxon mit Mod~~ + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +~~WinPC starter/USB~~->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch

Gruß, Andreas

Veröffentlicht : 25/05/2015 9:48 pm

YOEL

(@yoelba)

Beiträge: 8

Active Member

hi
i have just started using my new WIN PN NC USB software and have also scale issue
i cant find the screen in massage from 2015 i gess older software version
i have version 3.00/48
can you please assist -where can i find this parameters

thanks

Veröffentlicht : 10/06/2018 9:28 am